← Darsh Patel

Axial-flux motor coil CAD

EMPE Lab · SolidWorks · Ansys simulation geometry

On this page

At EMPE Lab, I modeled axial-flux motor coils and phase assemblies in SolidWorks to prepare geometry for Ansys simulation.

The detailed CAD models and project geometry are not shown here for intellectual-property reasons. The image below is an external reference illustrating an axial-flux motor coil.

Image source: E-Mobility Engineering (credit: WAFIOS) ↗

External reference image of a copper axial-flux motor coil with flat-wire turns and two terminals; image credited to WAFIOS.
Illustrative reference: a flat-wire copper coil for an axial-flux motor. Image credit: WAFIOS, via E-Mobility Engineering. This is not the EMPE Lab project CAD.